How tall are dance studio mirrors

Choosing The Right Mirror For Your Dance Studio

There are two ways to go…


Most studios install mirrors opposite their ballet barres so dancers can admire or critique their dancing or body parts. Some find it a distraction, others, a learning tool. In any event, a large percentage of studios have mirrors. For a long time, you had one choice, plate glass. Mirrors come in a variety of qualities and finishes (beveled edge or straight). The key to quality is degree of non-distortion. A fun house mirror does not work in a dance studio.


Mirrors come in various heights, usually between six and eight feet depending on the height of the ceiling and the size of the room. Normal installation is a foot off the ground. Because of their weight, mirrors have to be framed or anchored into the wall. The method of installation is determined by the wall material. Generally, this means mirrors should be installed by professionals to guarantee a safe and secure fit. Plate glass is not covered in most insurance policies for liability or replacement. It is probably necessary to amend your policy to secure coverage.


If you are on a lease you may be forced to remove the mirrors and repair the wall when you leave. Prior to purchase make sure you sign off on what you are getting, a non-distortion mirror, properly installed.


However, there is another way to go. They are called “glassless” mirrors. Designed for outer space by NASA, these mirrors are lightweight, do not shatter and are made of highly reflective non-distortion Mylar material that do not fog up. Since they are lightweight, you can install them yourself as if you were hanging a picture. Since they are not made of glass no additional insurance coverage is needed. Removal is also easy, leaving no damage to your walls.



These glassless mirrors come ready for mounting on walls or you can get them on wheels for easy mobility. They do not shatter upon impact but deflate and would need to be repaired. On the plus side, no shattered glass or injury.

These mirrors consist of special Mylar material with crystal clear reflectivity. They are attached to an aluminum frame after which, the material, is vacuum sealed. The mirrors come 4’ x ‘6, 4’ x 8’, 6’ x 4’ and 8’ x 4’ (vertical or horizontal).


They are one inch thick and super lightweight. The one drawback is they cannot be cut to size nor can you cut out an area for a slight switch. They are cost competitive when compared to top of the line plate glass mirrors and since you do not need professional installation, they save you money on labor too!


Lightweight, easy to install and remove, as well as safe, glassless mirrors provide quality reflectivity that could be the right choice for your studio.


Stagestep offers free shipping on four or more glassless mirrors in the contiguous United States. Call or email for a shipping quote to other countries or for lesser quantities. Online at Stagestep. com.

Your Guide To Choosing The Best Dance Studio Mirrors For Your Space

When you think about dancing, a few images come to mind. Among ballet barres, beautiful flooring, and pointe shoes, you probably envision a gorgeous mirrored wall too. Before you open your doors, ballet studio mirrors are an essential finishing touch for any studio. Read on to learn more about finding the best dance studio mirrors for your space, from sizing to materials.

The Basics Of Dance Studio Mirrors

Anyone dedicated to the art of dance knows the importance of perfecting form. In order to do that, dancers need to be able to see themselves, preferably from multiple angles. The best mirrors can be costly, but the one-time investment is worth every penny. Cutting costs can result in distortion and an unpleasant experience for your dancers, not to mention safety issues.

We discuss some of the major factors to consider below, but before you make any decisions, consider which unique challenges you may have to deal with. For instance, if you rent your space, discuss this purchase with the owner of your building. While you need to ensure that any mirrors are safely installed, you might need to consider less permanent options. On the other hand, if you own your studio space, you have the freedom to invest in long-term options.

What Types Of Dance Studio Mirrors Are Available?

From professionally installed seamless mirrors to DIY options that are appropriate for smaller studios, you have a range of options. Let’s take a look at some of the important factors to consider.


First, measure your studio space to get an accurate estimate of the size you need. Think about whether you want a seamless look with one large mirror or if you’re willing to place several pieces together.

In general, a custom mirror built to be a perfect fit for your wall will cost more but look better.


Mirrors can range from 1/4” thickness up to 1” thickness. The thicker the mirror, the more sturdy it will be.

While it’s rare, accidents do happen. If someone falls against the wall, a thicker mirror will hold up better against the force.


Glass is always the best way to get a clean and clear reflection. This is the most common choice for dance studios.

For the very best clarity, look for low-iron glass. This type of mirror will reduce any blueish tones. Furthermore, tempered glass is another variation to always consider for safety reasons. When it breaks, it shatters into many smaller pieces that are usually harmless.

Thinking of skipping glass to save money? Unfortunately, acrylic and plastic mirrors can be blurry and even distorted if they aren’t applied correctly. They also don’t hold up well over time. Dance studio mirrors made of Mylar can be an attractive option since they’re higher quality than acrylic and plastic, but they’re still shatter-proof. If you have a studio dedicated to young children, you may want to consider this option.

Framed vs. frameless

Whether you choose to have a framed or frameless ballet studio mirror comes down to personal preference. Some studio owners like the look of an elegant frame, as long as it doesn’t impede a student’s view. Frames can also cover any sharp edges or corners.

However, many studio owners prefer a frameless look that stretches from wall to wall to cut down on distractions.

Where Should I Put Our Dance Studio Mirrors?

In most cases, you will want a large mirror that encompasses one whole wall of the studio. This will be the direction your students face.

You may also choose to put a mirror on one side wall if your space permits. This is helpful for your dancers to be able to see themselves when turning or looking in that direction.

Believe it or not, less is more when it comes to dance studio mirrors. Avoid placing a mirror that faces any other mirror. This can create a distracting tunnel effect. Instead, focus on two high-quality mirrored walls in any space.

How Tall Are Dance Studio Mirrors?

The size of your space will determine the exact dimensions of your dance studio mirrors. Manufacturers offer a range of sizes, and many can create a custom fit if necessary.

In general, your mirrors do not have to be flush with the floor for dancers to see their feet. By placing it 16”-22” above the floor, you can free up outlet space and reduce costs.

However, it’s important to consider the variety of classes you offer at your studio. If you plan to offer fitness classes like yoga or Pilates as well, you will want mirrors that meet the floor so students can see themselves while sitting down.

Where To Find Dance Studio Mirrors

You have a range of options when you’re ready to purchase your dance studio mirrors.

Online wholesalers provide many sizes and types, making it easy to find a generic, but good fit for your space. Local glass installers and dance retailers are another routes to consider if you’re looking for a tailored fit. Feeling handy? Big box DIY stores sell glass mirrors that you can install yourself with the right tools.

Remember, the best types of mirrors will be ones that are made specifically for dance studios or gyms. These products have been designed with your type of space and needs in mind.

How To Install Dance Studio Mirrors

Mounting can be difficult due to the weight and size of dance studio mirrors. While it is possible to install a mirror yourself, professional installation is the best method. This will ensure that your mirrors are safe and secure for your students. In most cases, metal brackets are screwed into the wall line up with openings on the back of the mirror for a close fit. These also come with specially designed adhesives that can support the weight of the mirror and keep it in place.

Lastly, your ballet barre is another important detail to consider before installing mirrors. Drilling holes into your mirror is expensive and can hurt the integrity of the mirror over time. This commonly leads to chips, cracks, and breakage. There are two ways to avoid this. You can either use a floor-mounted barre or place mirrors directly above and below the barre after it is screwed into the wall.

Learn More

Once your studio is set up, the day-to-day work begins. The Studio Director’s dance studio software can help you manage class scheduling, marketing emails, billing, and much more.

For insight on how to successfully run your own dance studio, check out our eBook. It’s a free resource full of tips for dance studio owners looking to grow their own successful studio.

Discover How Our Software

Can Help Your Studio

Get Started Now

Mirrors for dance and choreographic halls: requirements and features of choice

The most important element of a ballet, choreographic and dance hall are mirrors - huge reflective structures in which dancers can see themselves in full growth during classes and control the correct execution of movements. About what should be a mirror for a choreographic hall, as well as what to consider when choosing it, will be discussed in our today's article.

The role of mirrors in the dance hall

During the arrangement of the premises, in which the choreographic studio will be located in the future, the choice of mirrors should be given special attention. Reflective surfaces in such institutions are essential, because they allow you to clearly and without any distortion reflect the silhouettes of the dancers, so that they can objectively evaluate and hone their every movement to the ideal. Among other things, with the help of mirrors, you can visually expand the space of the hall, make it lighter, and therefore more comfortable for classes.

Thanks to the presence of mirrors in a ballet or dance hall, you can:

  • see yourself “from the side” in full growth;
  • coordinate with other dancers to achieve the same rhythm;
  • follow the movements of each person from the group, correct possible mistakes in time in order to achieve an impeccable result in the end.

As you can see, the role of reflective surfaces in rooms where choreographic art classes take place cannot be overestimated, so below we will try to outline the features of choosing such products.

What to consider when ordering mirrors for a dance hall:

  • Security . Bumps and falls during classes are a common thing, so a mirror installed in a choreographic, ballet, etc. hall should be as durable as possible and able to withstand huge loads. The ideal solution would be to mount such products on glue or through holes with a safety film. This will prevent the mirror from breaking into fragments if it is damaged and thereby eliminate the risk of injury.
  • Image accuracy . The thinner the mirror, the more distorted the image reflected by it. That is why models for choreographic halls should be thick. The optimal thickness of the reflective surface in such rooms is 4-6 mm.
  • Product quality , no chips, damage or other defects. In this regard, it is necessary to give preference to products from reputable manufacturers who value their reputation and sell products that meet all the necessary requirements.
  • Dimensions . The standard height of mirrors for a choreographic hall is from 2 meters, the width is no more than 1.6 meters. Such parameters can provide a proper overview and proper training productivity. The fact is that low mirrors do not allow you to see yourself in full growth, and narrow canvases often distort the image at the joints. In cases where the area of ​​the room does not allow the installation of large 2-meter mirrors, you can order models 1.6 m high and install them at a distance of about 40 cm from the floor.
  • Joints between the sheets should be as small as possible, ideally it is better to give preference to a single piece.
  • Surface under the mirror. It must be perfectly flat to avoid, firstly, image distortion, and secondly, installation problems. In addition, the wall must have a certain strength factor and withstand the load exerted on it by the canvas.

Installation of mirrors in the ballet hall

During the installation of huge mirrors in dance studios, the following methods of fastening are usually used: heavy canvas.

  • Mounting plates - a common and justified mounting option, when plates with holes are attached to the back of the product, hung on hooks in the wall.
  • Mounting through holes is a reliable and popular method, but before screwing them in, make sure that the surface is solid.
  • Tanz. mirrors

    In today's world, a healthy lifestyle and regular exercise are becoming increasingly popular.

    Looking at yourself from the side is necessary when mastering the art of dance, doing fitness, sports.

    Therefore, the equipment for the dance hall, gym, gym, fitness club, dance studio, schools, etc. provides for the installation of mirrors. Depending on what classes will be held in the hall or school, the purpose of the mirrors may vary.

    Wall finishing.

    Dance hall mirrors should preferably be mounted with a neutral silicone adhesive to increase safety. Therefore, the finish of the walls should not interfere with the setting of the adhesive. If the wall is made of drywall or it is painted with water-based paint, it is enough to prime it. It should be remembered that glue will grab worse on crumbling and dusty surfaces. Glue allows you to install mirrors on walls covered with wallpaper.

    Sockets, switches.

    If there are sockets or switches in the mirror area, they can be bypassed by making a cutout in the mirror. But it is better to do without cutouts, so the mirror will be stronger. Switches are usually located at the front door at a distance of 10...20 cm from the corner, and mirrors are at a distance of 10...100 cm from the corner, therefore, the mirror can not be brought to the switches. Sockets are usually installed at a height of 20...35 cm from the floor, which also does not interfere with the common method of installing mirrors at a height of 40 cm from the floor. So it will remain possible to install in the future a ballet barre with a support of the rack to the floor and to the wall at a height of 30 cm, and those involved will see themselves in full growth even standing next to the mirror, if lying down is not planned.

    Mirror height.

    The standard height of the dance hall mirror is 1.6 meters. The distance from the floor is 40 cm and the mirror ends at a height of 2 meters. This is enough for dancing and sports. An exception to the height of the mirrors are ballet schools and classes with trampolines, here the task may be to see the reflection of the student when performing elements with support (support in ballet). It can also be a task to see your reflection when doing yoga while lying down. Then the mirrors need to be raised from the floor by 5 . .. 15 cm. Too low an arrangement of the glass sheet is not recommended in children's institutions - there is a high probability of chipping from impact.

    How mirrors are attached.

    We recommend gluing large mirrors with neutral silicone sealant dotted over the entire surface. Silicone will create a shock-absorbing layer, preventing the glass from possible chipping. Installation on liquid nails will not create a cushioning layer, the mirror will be at risk of "moving out" after several years of service when the glue dries. Also on the market there is a large amount of low-quality glue based on liquid nails, it reacts with amalgam, and the mirror deteriorates in a few months.

    Mirrors for children's rooms.

    We use AGC's range of high-tech and environmentally friendly mirrors to meet the highest demands: 10 times more corrosion resistant according to CASS testing standards and three times more scratch resistant than conventional mirrors for long life. Moreover, they do not contain copper or formaldehyde and comply with RoHS standards (

    Ballet machines.

    For a choreographic, ballet school, it is preferable to install ballet bars on three walls, and on the fourth mirror. Two-level machines made of hardwood (birch, beech, oak). The length of the pole from the post to the post is no more than two meters, with heavy load. Thick-walled metal posts, fixed to the floor and the main wall.


    Warranty for manufactured and installed products is 12 months.

    Hall for choreography

    Such a room provides for a barre, which is installed near one of the walls, or along the perimeter of the entire hall. Opposite the machine, a mirror must be located so that the student can see his every movement. Fasteners for the ballet barre outside the mirrors are taken into account in advance. Better to have it installed by a professional.

    Pole dance hall

    Depending on the area, this hall can accommodate up to 10 poles. Pole dancers make many movements, so such a hall should have as many mirrors as possible. The best option is mirrors on three walls of the hall.

    Popular dance hall (Latin American, European, etc.)

    Such halls usually do not require additional equipment. For their design, a large mirror on one of the walls is suitable. To work out some elements, portable mirrors for the dance hall are used.

    Mirrors for the gym (fitness club, gym)

    The greater the view of the room, the more comfortable it is for athletes to exercise. Thanks to the mirror, the hall becomes lighter and visually more spacious, the trainees see themselves from all sides and can correct themselves if the exercise is performed incorrectly. A full-wall mirror is ideal for a gym where fitness classes are held, on simulators, as well as for ordinary gyms. Most often, a wall is chosen for this, on which direct sunlight does not fall. One large mirror can be placed on this wall or a full-wall mirror covering can be arranged. The optimal size is a mirror in which the athlete can see himself in full growth.

    Due to the mirrors, the dance / sports hall not only expands, but also receives additional lighting - when refracted, the mirror surface reflects, so the location of the lamps should be taken into account by specialists, both for the gym and for other training rooms.

    Our mirror products are distinguished by their high quality and reliability combined with an elegant appearance.

    We install mirrors on walls and columns in various studios and dance halls. The maximum comfort of training is ensured by a full view of the room. We are ordered to install mirrors for a gym, fitness and aerobics studios, a wrestling club, mirrors for a dance hall in St. Petersburg are popular.

    High demands are placed on dance hall mirrors, as this is the most functional part of the hall.

    - Good reflection quality, no distortion of shapes and colors.

    - Security. The mirror must be durable and withstand impact.

    - Mirrors must be large.

    - The joint between the mirrors must be minimally visible.

    - Mirrors must be of good quality and must not be scratched or excessively soiled.

    Mirrors for dance (ballet) halls are made of mirrors with a thickness of 4, 5 or 6 mm, large mirrors are made to fit the size of the wall with a multiple division into equal parts. The maximum size of the large mirror canvas is 3000 × 2000 mm.

    Average dimensions 2000 × 1600 mm. In any case, the size of the canvas is limited by the possibility of raising the mirror to the floor.

    Small mirrors can be decorated with a dance hall or club emblem. Processing is done by sandblasting or engraving.

    Installation of mirrors

    EcoSteklo supplies and installs mirrors for fitness centers and dance studios from 4 × 1000 × 1000 mm to 6 × 2000 × 3000 mm from a European manufacturer.

    We use a neutral silicone based adhesive, not liquid nails, liquid nail mirrors may come off after a few years because such glue quickly dries out, does not create depreciation, needs a perfectly flat wall surface. Despite this, many companies use this type of glue. Be careful when accepting the work performed, inspect the mirrors for a dull sound when tapped, a properly installed mirror is held by a monolith.

    If the task is to dismantle it, it should not come off entirely, it has to be broken into small parts. The average dismantling time for 1m² of mirror = 50 minutes (you must agree that bad glue will not be able to hold the mirror like that). Preparations should be made for the dismantling process in order to avoid spilling unnecessary fragments. But dismantling is required very rarely.

    Mirrors installed using our technology have a longer service life, are less prone to scratches and chips (atraumatic, anti-trap, anti-shatter), resistant to high humidity (moisture resistant) and comply with operational and environmental safety standards.

    If the walls are not suitable for mounting a mirror in the gym of the dance studio, we will take care of leveling them as an additional service.

    Learn more